2025 Thinkscan Plus S7 Car OBD2 Scanner Auto Diagnostic Tool ABS SRS BCM IC AC

Lifetime Free All Cars 7 Systems Diagnostic:

This car obd2 scanner is capable of reading and clearing trouble codes of  E-CM/ABS/SRS/T-CM/B-CM/AC/IC Systems 

Engine System(E-CM)
This Check Engine Code Readers helps you read fault codes and shows DTC definition to tell you what the problem is, and clear the error, turn off the the warning light.

Anti-lock Brake System(ABS)
thinkcar Plus S7 Scanner has the ability to retrieve ABS fault/clear the codes. It also allows you to monitor and diagnose the operating conditions of the ABS to ensure that the repairs are effective.

Transmission System(T-CM)
Transmission Scanner tool can keep the AT output closely linked to the load and speed, views live data, reads and clears codes. Retrieving error information from the Automatic Transmission occurs seamlessly.

Airbag System(SRS)
The Airbag Reset Tool makes the vehicle engine work in a safe and proper way through reading and clearing any fault code that exists in SRS system, and turning off the airbag’s warning light.

Body Control Module System(B-CM) 
Carry out fault diagnosis on body/frame/transmission system/steering system/brake system/driving system

Air-Conditioning System (AC) 
Car air conditioning system diagnosis: Diagnose the cooling, heating, ventilation and air purification devices of the air in the cabin. Ensure that the vehicle has a comfortable environment, reduce the fatigue strength of the driver, and improve driving safety.

Instrument System (IC)
The car dashboard is a device that reflects the working conditions of the various systems of the vehicle: fuel indicator, cleaning fluid indicator, electronic throttle indicator, front and rear fog light indicator and warning light. ThinkScan Plus S7 can diagnose the fault location of the instrument and provide fault codes

Support 28 Reset Services(Lifetime Free All Cars Optional 5 Resets)

 THINKSCAN Plus S7 currently supports 28 maintenance software,  The maintenance software is completely free to use and free to upgrade. You Can Choose 5 Reset Service as Lifetime Free from 28 Maintenance Service 

1.Oil Lamp Reset Service  
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil. 

2.EPB Electronic Park Brake Reset 
It is important in the maintenance of electronic braking system's safety and efficiency. 

3.BAT battery service  
Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle. 

4.DPF Diesel Particulate Filter Reset 
Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit. 

5.SAS Steering Angel Sensor Reset 
Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration. 

6.TPMS Tire Pressure Monitoring System Reset 
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors. 

7.IMMO RESET
1 In order to prevent the car from being used by illegal keys, through the anti-theft key matching function, the car can only be used normally after the anti-theft device control system on the car recognizes and authorizes the remote control.
2 Anti-theft matching is required when replacing the ignition switch key, ignition switch, combination meter, engine control unit (ECU), body control module (B-CM) and remote control battery

8.ABS Bleeding  
ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system. 

9.Sunroof Reset 
The sunroof needs to be reset when the sunroof control unit have communication problem or changed. 

10.Suspension Reset  
Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off. 

11.Gearbox (Transmission )Reset  
Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car. 

12.AFS Headlamp Reset 
'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel. 

13.Injector Coding  
Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off. 

14.Throttle Adaptation  
The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair. 

15.Gear Learning  
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running. 

16.EGR Reset   
Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load. 

17.A/F Reset 
This function is applied to set or learn Air/Fuel ratio parameters. 

18.Adblue Reset(Diesel Engine Exhaust Gas Filter) 
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required. 

19.Airbag Reset 
This function resets the airbag data to clear the airbag collision fault indicator. 

20.Coolant Bleeding 
Use this function to activate the electronic water pump before venting the cooling system. 

21.AT Learning 
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift 

22.Language Change 
This function is used to change the system language of the vehicle central control panel. 

23.Nox Sensor Reset 
Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.  

 24.ODO Reset 
a) ODO reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage. b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do ODO reset after maintenance. 

25.Stop/Start Reset 
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware). 

26.Seat Calibration 
This function is applied to match the seats with memory function that are replaced and repaired. 

27.Transport Mode 
ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal. 

28.Windows Calibration 
This feature is designed to perform door window matching to recover ECU initial memory, and recover the  automatic ascending and descending function of power window. 

NOTE:If you need more special functions, you need to pay an additional $29.95 /year for a function.  

Support 10 Multi-language

English, French, German, Italian, Spanish, Portuguese, Japanese, Russian, Polish, Turkish 

Full 10 OBD2 Functions-Make a Better Detection for Car Engine System
This section is specifically designed for the engine called the "car heart". It is necessary to keep an eye on the engine status to ensure the efficient operation of the engine to ensure your travel safety. In addition, it can also be used before you send the car to environmental detection.
– Read and Clear the fault codes, turn-off Malfunction Indicator Light (MIL)
– Displays Fr-eeze Frame data
– Displays O2 Sensor test results
– Display I/M readiness status. (Non-continuously Monitored Systems Test )
– Show Live Data in graphs such as engine RPM, temperatures, ignition advance, speed, etc.
– Request On-Board Monitoring test results for specific monitored systems
– Built-in DTC lookup library with cause analysis
– Special control mode requests control of EVAP test.
– Request Vehicle Information

For people: 
1.Car service technician /2.Small and medium repair shop /3.Individual owners who like deep DIY vehicles. 

Product Parameters: 
Display Screen ：5-Inch/TFT(IPS) 
Connection :Wi-Fi
RAM:2G ROM:32GB 
Working Temperature : 32℉~122℉ 
Storage Temperature: -4℉~144℉ 

Packing List: 
1*Thinkcar Thinkscan Plus S7 Host 
1*User manual 

Application scenario:
1.For maintenance technicians, the Thinkscan Plus, which is convenient to carry, is the best choice for road rescue or door-to-door service.
2.For small repair shops, there is no need to purchase expensive diagnostic equipment, Thinkscan Plus can also meet the fault diagnosis of different brands of vehicles.
3.In-depth DIY car owners, car owners with certain maintenance skills and strong hands-on ability, can always keep this comprehensive and powerful, yet economical diagnostic equipment.