Engine Camshaft Cam Bearing Installation Removal Insert Tool Kit 16Pcs Universal
Labworkautocom
Best choice of motor parts
|
|
||||||
|
|
|
|
|||
|
|
|
|
|||
Determine the size of the bearing I.D.
1. First choose the correct expanding driver from the listing below.
Place the expanding driver onto the expander assembly.
Be sure to line up each of the segments of the driver with the separa-
tions on the expander assembly. Lubricate the smooth side of the rubber sleeve to help with putting the driver on the expander
2. Next place the nylon centering cone over the driving shaft.
Now screw the expander assembly and driving washer from above on to the shaft. The kit comes with a driver shaft extension; this may
be needed for removal of the rear bearings.
3. Place the expander assembly into the front of the block and tighten the expander on the first bearing for removal, typically the front of block is done first. Be sure to tighten until snug in the bearing.
4. Center the cone in first bearing housing and drive bearing out.
Loosen the expanding driver assembly to relieve pressure and pull tool back through the next bearing to be driven.
Repeat the
processes above until all bearings are removed.
NOTICE: Some blocks have a sealed cam valley making the camshaft inaccessible except from the ends.
In these cases use a socket and extension to enlarge and reduce the expander assem-bly while you remove,
or install each bearing.
1. The expander assembly needs to be reduced before installing the new bearings. Be sure
separation lines are aligned, referenced in the bearing removal section above.
2. Insert the tool from the front of the block through the cam bearing housings until it’s in front of
the rear bearing housing. Now place the new bearing on the expanding driver
and tighten until the bearing is held firmly in place.
3. With the nylon centering cone in place at the first housing drive the bearing into place.
Repeat this step until all bearings are driven except the front or first bearing.
To drive the number one bearing, you need to move to the rear of the engine.
Again use the nylon centering cone in the first
bearing housing at the rear of the block.
Packing Includes:
1. Expander Assembly
2. Short Driver Shaft
3. Driver Shaft Extension
4. Expanding Bearing Drivers
5. Nylon Centering Cone
6. Driver Washers
7. Replacement Rubber Sleeves
8.Storage case
What kind of bearings do I need for a camshaft?
When installing cam bearings, always work your way from the rear of the block forward.
When fitting aluminum cam bearings, it’s important to allow sufficient bearing-to-camshaft clearance,
since the harder aluminum alloy bearings won’t wear in as rapidly as babbitt bearings to make their own clearance.
How are cam bearings installed into a block?
Installation of cam bearings into the block must be done carefully to
avoid shaving material from the outside diameter of the bearings.
This can easily cause a buildup of excess material between the bearing and the block’s bearing bore,
which will “squeeze” the bearing, resulting in oil clearance reduction at the bearing inside diameter.
When do you start the cam bearing selection process?
The installation process begins after you’ve accomplished any machining that might be needed
(cylinder boring and/or honing, align-honing, deck resurfacing, cam bore alignment, etc.).
Before starting, make certain that the block is totally clean.
Camshaft Bearing Installation and Removal Tools
The right tool can make any job easier, and for the press-fit bearings your camshaft rides on,
the right tool is a camshaft bearing installer. Sometimes called a bearing knocker,
these tools let you tap the bearings into (or out of) the bores with your favorite hammer.
universal camshaft bearing installation tools are used to remove and
install camshaft bearings in nearly all automobile engines, from compacts to heavy-duty trucks.
They take the difficulty out of bearing replacement and drive camshaft bearings smoothly.
The expansion sleeves grip firmly and are easy on new bearings.
The expander and the split driving plates have replaceable rubber sleeves.
| Item Specifics | |
|---|---|
| Brand | labworkauto |
| Manufacturer Part Number | LA941868CM |
| Modified Item | No |
| Manufacturer Warranty | 1 Year |
| Condition | New |
| Range | 1.1 25" to 2.69" (28.58 - 68.3mm) |
| Type | Camshaft Bearing Installation and Removal Tool Kit |
| Material | Carbon steel |
| Custom Bundle | No |
| Non-Domestic Product | No |
| Country/Region of Manufacture | China |
We accept payment through PayPal, afterpay, VISA, Google pay, mastercard, AMEX, apple pay, DISCOVER.
Payments must be received within 14 days of auction end.
We process your order within 3 business day upon payment(note: NOT counting holidays or weekends).
Local pickup NOT available at this time.
Please contact us first when return, exchange and refund is required.
Any direct return of purchased items will not be processed.
Change-of-mind return can only be accepted within 7 days after purchase.
All other returns can be accepted in 30 days.
Serving US market since 2005.
Based in California offering quality products, offer various types of auto parts .
Pick up orders welcome here and we also offer great discount for wholesales.
Labworkautocom
Best choice of motor parts
Shop Category Hot Item
You may like
|
 Engine Camshaft Cam Bearing Installation Removal Insert Tool Kit 16Pcs Universal
Determine the size of the bearing I.D.
1. First choose the correct expanding driver from the listing below. Place the expanding driver onto the expander assembly. Be sure to line up each of the segments of the driver with the separa-
2. Next place the nylon centering cone over the driving shaft. Now screw the expander assembly and driving washer from above on to the shaft. The kit comes with a driver shaft extension; this may
3. Place the expander assembly into the front of the block and tighten the expander on the first bearing for removal, typically the front of block is done first. Be sure to tighten until snug in the bearing. 4. Center the cone in first bearing housing and drive bearing out. Loosen the expanding driver assembly to relieve pressure and pull tool back through the next bearing to be driven. Repeat the
NOTICE: Some blocks have a sealed cam valley making the camshaft inaccessible except from the ends.
In these cases use a socket and extension to enlarge and reduce the expander assem-bly while you remove, or install each bearing.
1. The expander assembly needs to be reduced before installing the new bearings. Be sure
2. Insert the tool from the front of the block through the cam bearing housings until it’s in front of and tighten until the bearing is held firmly in place.
3. With the nylon centering cone in place at the first housing drive the bearing into place. Repeat this step until all bearings are driven except the front or first bearing. To drive the number one bearing, you need to move to the rear of the engine. Again use the nylon centering cone in the first
Packing Includes: What kind of bearings do I need for a camshaft?
When fitting aluminum cam bearings, it’s important to allow sufficient bearing-to-camshaft clearance, since the harder aluminum alloy bearings won’t wear in as rapidly as babbitt bearings to make their own clearance.
How are cam bearings installed into a block?
avoid shaving material from the outside diameter of the bearings. This can easily cause a buildup of excess material between the bearing and the block’s bearing bore, which will “squeeze” the bearing, resulting in oil clearance reduction at the bearing inside diameter.
When do you start the cam bearing selection process?
(cylinder boring and/or honing, align-honing, deck resurfacing, cam bore alignment, etc.). Before starting, make certain that the block is totally clean.
Camshaft Bearing Installation and Removal Tools
The right tool can make any job easier, and for the press-fit bearings your camshaft rides on, the right tool is a camshaft bearing installer. Sometimes called a bearing knocker, these tools let you tap the bearings into (or out of) the bores with your favorite hammer. universal camshaft bearing installation tools are used to remove and install camshaft bearings in nearly all automobile engines, from compacts to heavy-duty trucks. They take the difficulty out of bearing replacement and drive camshaft bearings smoothly. The expansion sleeves grip firmly and are easy on new bearings. The expander and the split driving plates have replaceable rubber sleeves. Payment
We accept payment through PayPal, afterpay, VISA, Google pay, mastercard, AMEX, apple pay, DISCOVER. Payments must be received within 14 days of auction end. We process your order within 3 business day upon payment(note: NOT counting holidays or weekends). Local pickup NOT available at this time. Shipping
We process and dispatch your purchase within 3 business day after payment clearance.
We offer free USPS or FEDEX Package as default.
Shipping Time is around 3-5 business days
Returns
Please contact us first when return, exchange and refund is required.Any direct return of purchased items will not be processed.Change-of-mind return can only be accepted within 7 days after purchase.All other returns can be accepted in 30 days. We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the
items are in their original neat conditions.
Contact Us
Before leaving us neutral or negative feedback, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via eBay or PayPal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
About US
Serving US market since 2005.Based in California offering quality products, offer various types of auto parts .Pick up orders welcome here and we also offer great discount for wholesales.Copyright @ 2019 labworkautocom. All right reserved. |
On Aug 14, 2025 at 18:32:16 PDT, seller added the following information:
Shipping Overview:
• Shipping: Standard Domestic Shipping within the United States charges first item USD 6.99 and additional item USD 3.0 each. Standard International Shipping from United Kingdom, Germany, Italian and Japan to the United States charges first item USD 11.99 and additional item USD 4.0 each.
• Import Duty: Everymarket collects applicable duties and taxes on goods imported into the U.S. at checkout, it's calculated based on the goods value multiply by the rate. For United Kingdom and China goods is 10%, Germany, Italian and Japan goods is 15%. We are committed to making your U.S. shopping experience simple and transparent. The method of delivery—either Delivered Duty Paid (DDP) or Delivered Duty Unpaid (DDU)—depends on whether duties and taxes are collected at the time of your purchase.
• Order Processing: Please allow 1-2 business days for order processing and preparation before shipment.
• Domestic Shipping: Orders within the U.S. are shipped via USPS or FedEx, depending on the origin of the product. Average transit times to the United States is 3 - 7 Business days and average transit times to International is 7 - 14 Business days
• International Shipping: Currently, we only ship within the USA.
• Tracking Information: Every order is trackable. You will receive a tracking number once your order has been shipped. Products may be shipped from various global fulfillment centers.
Shipping Delays:
Please note that shipping times may vary due to factors beyond our control, such as weather conditions, natural disasters, or peak holiday periods. While we strive to ensure timely delivery, the exact arrival time cannot be guaranteed and is managed by the shipping carrier.
Shipping Options:
-
Standard Delivery: Most orders are shipped within 3-7 business days. Larger items may utilize LTL shipping for safe handling.
-
Handling Time: We handle shipments on business days (Monday - Friday), with a preparation time of 1-2 days.
-
Additional Charges: Some items require additional shipping charges due to their size, weight, or special handling. These charges are specified on the product pages and are not eligible for shipping discounts.
-
Exclusions: Gift cards, packaging, taxes, and prior purchases do not count toward the minimum purchase requirement for free shipping. This offer is valid only for shipments to U.S. addresses, including Puerto Rico.
Delivery Details:
-
Estimates: Standard shipping within the US typically takes 3-7 business days. These are estimates and not guarantees.
-
Shipping Restrictions: We ship to all 50 states, Washington, DC, U.S. territories, and APO/FPO/DPO addresses. Shipping options vary based on the delivery address.
-
Remote Areas: Shipments to remote areas may incur additional charges or require pickup from a nearby shipping partner’s location.
Shipping Confirmation:
You will receive a shipping confirmation email with a tracking number as soon as your order is dispatched. If you do not receive this email immediately, please be assured that your items will arrive within the estimated delivery window provided at checkout.
Order Modifications:
If you need to cancel or modify your order, please contact our customer support immediately.
Issues with Delivery:
If your order shows as delivered but you have not received it, please contact the shipping carrier directly to resolve the issue. For persistent problems, contact our customer service at cs@everymarket.com.
Customer Support:
Our team is available 24/7 to assist you with any questions or concerns regarding your order. We are committed to ensuring a smooth shopping experience.
Return & Refund Policy Overview
Please review our return and refund policies below to ensure a smooth transaction process.
Return Policy
-
Duration: You have 30 days from receiving your item to initiate a return.
-
Condition: Items must be unworn, unwashed, with original tags and packaging intact.
-
Shipping Costs:
- If your return is approved due to a defective, damaged, or incorrect item, we will provide a prepaid return shipping label at no cost.
- If the item has no quality issues and matches the product listing and description, please contact our Customer Service team before returning it. Once your return is authorized, you must return the item according to the provided instructions. In this case, the return shipping cost is the customer's responsibility.
- We are not responsible for return shipping costs for items returned without prior authorization. -
Packaging: Ensure returned items are well-packaged to avoid damage during transit.
-
Tracking: Use a trackable and insured shipping method as we are not liable for items lost or damaged on return.
-
Initiating a Return: Contact us at cs@everymarket.com to start your return. We will provide a return shipping label and instructions upon approval. Returns without prior approval will not be accepted.
How to Return
-
Method: Returns must be sent back by mail to the address provided in the return instructions.
Return Label
-
Please contact us to get return labels.
Product Conditions for Return
-
Eligible Products: Returns are only accepted for items in new condition.
Nonreturnable Items
Certain items are not eligible for return:
-
Electronic devices after 30 days (e.g., computers, laptops, Kindles)
-
Gift cards, prepaid game cards
-
Perishable goods, live insects, some jewelry, some health and personal care items
-
Customized or personalized products
-
Items with special shipping restrictions
Refund Policy
-
Window: Eligible products may be returned within 30 days of delivery for a refund.
-
Refund Method: Refunds are processed to the original payment method or as store credit for items purchased with gift cards.
-
Processing Time: Refunds are processed within 3-5 business days after we receive the return; please allow additional time for shipping and bank processing.
Claims
Inspect your order upon arrival and report any defects, damages, or incorrect items immediately to allow us to address the issue. For claims, contact our support team with details of the issue.
Exchange Policy
For the quickest service, return your original item and place a new order for the desired product once your return is accepted.
Return Address
EveryMarket Customer Service 2101 E Terra Ln, O'Fallon, MO 63366
Customer Support
Available 24/7 for any questions or assistance needed:
-
Phone: +1 (800) 660-3783
-
Email: cs@everymarket.com
Labworkautocom
Best choice of motor parts
|
|
|
||||||
|
|
|
|
|
|||
|
|
|
|
|
|||
Determine the size of the bearing I.D.
1. First choose the correct expanding driver from the listing below.
Place the expanding driver onto the expander assembly.
Be sure to line up each of the segments of the driver with the separa-
tions on the expander assembly. Lubricate the smooth side of the rubber sleeve to help with putting the driver on the expander
2. Next place the nylon centering cone over the driving shaft.
Now screw the expander assembly and driving washer from above on to the shaft. The kit comes with a driver shaft extension; this may
be needed for removal of the rear bearings.
3. Place the expander assembly into the front of the block and tighten the expander on the first bearing for removal, typically the front of block is done first. Be sure to tighten until snug in the bearing.
4. Center the cone in first bearing housing and drive bearing out.
Loosen the expanding driver assembly to relieve pressure and pull tool back through the next bearing to be driven.
Repeat the
processes above until all bearings are removed.
NOTICE: Some blocks have a sealed cam valley making the camshaft inaccessible except from the ends.
In these cases use a socket and extension to enlarge and reduce the expander assem-bly while you remove,
or install each bearing.
1. The expander assembly needs to be reduced before installing the new bearings. Be sure
separation lines are aligned, referenced in the bearing removal section above.
2. Insert the tool from the front of the block through the cam bearing housings until it’s in front of
the rear bearing housing. Now place the new bearing on the expanding driver
and tighten until the bearing is held firmly in place.
3. With the nylon centering cone in place at the first housing drive the bearing into place.
Repeat this step until all bearings are driven except the front or first bearing.
To drive the number one bearing, you need to move to the rear of the engine.
Again use the nylon centering cone in the first
bearing housing at the rear of the block.
Packing Includes:
1. Expander Assembly
2. Short Driver Shaft
3. Driver Shaft Extension
4. Expanding Bearing Drivers
5. Nylon Centering Cone
6. Driver Washers
7. Replacement Rubber Sleeves
8.Storage case
What kind of bearings do I need for a camshaft?
When installing cam bearings, always work your way from the rear of the block forward.
When fitting aluminum cam bearings, it’s important to allow sufficient bearing-to-camshaft clearance,
since the harder aluminum alloy bearings won’t wear in as rapidly as babbitt bearings to make their own clearance.
How are cam bearings installed into a block?
Installation of cam bearings into the block must be done carefully to
avoid shaving material from the outside diameter of the bearings.
This can easily cause a buildup of excess material between the bearing and the block’s bearing bore,
which will “squeeze” the bearing, resulting in oil clearance reduction at the bearing inside diameter.
When do you start the cam bearing selection process?
The installation process begins after you’ve accomplished any machining that might be needed
(cylinder boring and/or honing, align-honing, deck resurfacing, cam bore alignment, etc.).
Before starting, make certain that the block is totally clean.
Camshaft Bearing Installation and Removal Tools
The right tool can make any job easier, and for the press-fit bearings your camshaft rides on,
the right tool is a camshaft bearing installer. Sometimes called a bearing knocker,
these tools let you tap the bearings into (or out of) the bores with your favorite hammer.
universal camshaft bearing installation tools are used to remove and
install camshaft bearings in nearly all automobile engines, from compacts to heavy-duty trucks.
They take the difficulty out of bearing replacement and drive camshaft bearings smoothly.
The expansion sleeves grip firmly and are easy on new bearings.
The expander and the split driving plates have replaceable rubber sleeves.
| Item Specifics | |
|---|---|
| Brand | labworkauto |
| Manufacturer Part Number | LA941868CM |
| Modified Item | No |
| Manufacturer Warranty | 1 Year |
| Condition | New |
| Range | 1.1 25" to 2.69" (28.58 - 68.3mm) |
| Type | Camshaft Bearing Installation and Removal Tool Kit |
| Material | Carbon steel |
| Custom Bundle | No |
| Non-Domestic Product | No |
| Country/Region of Manufacture | China |
We accept payment through PayPal, afterpay, VISA, Google pay, mastercard, AMEX, apple pay, DISCOVER.
Payments must be received within 14 days of auction end.
We process your order within 3 business day upon payment(note: NOT counting holidays or weekends).
Local pickup NOT available at this time.
Please contact us first when return, exchange and refund is required.
Any direct return of purchased items will not be processed.
Change-of-mind return can only be accepted within 7 days after purchase.
All other returns can be accepted in 30 days.
Serving US market since 2005.
Based in California offering quality products, offer various types of auto parts .
Pick up orders welcome here and we also offer great discount for wholesales.
Labworkautocom
Best choice of motor parts
Shop Category Hot Item
You may like
|
Engine Camshaft Cam Bearing Installation Removal Insert Tool Kit 16Pcs Universal
Determine the size of the bearing I.D.
1. First choose the correct expanding driver from the listing below. Place the expanding driver onto the expander assembly. Be sure to line up each of the segments of the driver with the separa-
2. Next place the nylon centering cone over the driving shaft. Now screw the expander assembly and driving washer from above on to the shaft. The kit comes with a driver shaft extension; this may
3. Place the expander assembly into the front of the block and tighten the expander on the first bearing for removal, typically the front of block is done first. Be sure to tighten until snug in the bearing. 4. Center the cone in first bearing housing and drive bearing out. Loosen the expanding driver assembly to relieve pressure and pull tool back through the next bearing to be driven. Repeat the
NOTICE: Some blocks have a sealed cam valley making the camshaft inaccessible except from the ends.
In these cases use a socket and extension to enlarge and reduce the expander assem-bly while you remove, or install each bearing.
1. The expander assembly needs to be reduced before installing the new bearings. Be sure
2. Insert the tool from the front of the block through the cam bearing housings until it’s in front of and tighten until the bearing is held firmly in place.
3. With the nylon centering cone in place at the first housing drive the bearing into place. Repeat this step until all bearings are driven except the front or first bearing. To drive the number one bearing, you need to move to the rear of the engine. Again use the nylon centering cone in the first
Packing Includes: What kind of bearings do I need for a camshaft?
When fitting aluminum cam bearings, it’s important to allow sufficient bearing-to-camshaft clearance, since the harder aluminum alloy bearings won’t wear in as rapidly as babbitt bearings to make their own clearance.
How are cam bearings installed into a block?
avoid shaving material from the outside diameter of the bearings. This can easily cause a buildup of excess material between the bearing and the block’s bearing bore, which will “squeeze” the bearing, resulting in oil clearance reduction at the bearing inside diameter.
When do you start the cam bearing selection process?
(cylinder boring and/or honing, align-honing, deck resurfacing, cam bore alignment, etc.). Before starting, make certain that the block is totally clean.
Camshaft Bearing Installation and Removal Tools
The right tool can make any job easier, and for the press-fit bearings your camshaft rides on, the right tool is a camshaft bearing installer. Sometimes called a bearing knocker, these tools let you tap the bearings into (or out of) the bores with your favorite hammer. universal camshaft bearing installation tools are used to remove and install camshaft bearings in nearly all automobile engines, from compacts to heavy-duty trucks. They take the difficulty out of bearing replacement and drive camshaft bearings smoothly. The expansion sleeves grip firmly and are easy on new bearings. The expander and the split driving plates have replaceable rubber sleeves. Payment
We accept payment through PayPal, afterpay, VISA, Google pay, mastercard, AMEX, apple pay, DISCOVER. Payments must be received within 14 days of auction end. We process your order within 3 business day upon payment(note: NOT counting holidays or weekends). Local pickup NOT available at this time. Shipping
We process and dispatch your purchase within 3 business day after payment clearance.
We offer free USPS or FEDEX Package as default.
Shipping Time is around 3-5 business days
Returns
Please contact us first when return, exchange and refund is required.Any direct return of purchased items will not be processed.Change-of-mind return can only be accepted within 7 days after purchase.All other returns can be accepted in 30 days. We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the
items are in their original neat conditions.
Contact Us
Before leaving us neutral or negative feedback, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via eBay or PayPal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
About US
Serving US market since 2005.Based in California offering quality products, offer various types of auto parts .Pick up orders welcome here and we also offer great discount for wholesales.Copyright @ 2019 labworkautocom. All right reserved. |
On Aug 14, 2025 at 18:32:16 PDT, seller added the following information:
Shipping Overview:
• Shipping: Standard Domestic Shipping within the United States charges first item USD 6.99 and additional item USD 3.0 each. Standard International Shipping from United Kingdom, Germany, Italian and Japan to the United States charges first item USD 11.99 and additional item USD 4.0 each.
• Import Duty: Everymarket collects applicable duties and taxes on goods imported into the U.S. at checkout, it's calculated based on the goods value multiply by the rate. For United Kingdom and China goods is 10%, Germany, Italian and Japan goods is 15%. We are committed to making your U.S. shopping experience simple and transparent. The method of delivery—either Delivered Duty Paid (DDP) or Delivered Duty Unpaid (DDU)—depends on whether duties and taxes are collected at the time of your purchase.
• Order Processing: Please allow 1-2 business days for order processing and preparation before shipment.
• Domestic Shipping: Orders within the U.S. are shipped via USPS or FedEx, depending on the origin of the product. Average transit times to the United States is 3 - 7 Business days and average transit times to International is 7 - 14 Business days
• International Shipping: Currently, we only ship within the USA.
• Tracking Information: Every order is trackable. You will receive a tracking number once your order has been shipped. Products may be shipped from various global fulfillment centers.
Shipping Delays:
Please note that shipping times may vary due to factors beyond our control, such as weather conditions, natural disasters, or peak holiday periods. While we strive to ensure timely delivery, the exact arrival time cannot be guaranteed and is managed by the shipping carrier.
Shipping Options:
-
Standard Delivery: Most orders are shipped within 3-7 business days. Larger items may utilize LTL shipping for safe handling.
-
Handling Time: We handle shipments on business days (Monday - Friday), with a preparation time of 1-2 days.
-
Additional Charges: Some items require additional shipping charges due to their size, weight, or special handling. These charges are specified on the product pages and are not eligible for shipping discounts.
-
Exclusions: Gift cards, packaging, taxes, and prior purchases do not count toward the minimum purchase requirement for free shipping. This offer is valid only for shipments to U.S. addresses, including Puerto Rico.
Delivery Details:
-
Estimates: Standard shipping within the US typically takes 3-7 business days. These are estimates and not guarantees.
-
Shipping Restrictions: We ship to all 50 states, Washington, DC, U.S. territories, and APO/FPO/DPO addresses. Shipping options vary based on the delivery address.
-
Remote Areas: Shipments to remote areas may incur additional charges or require pickup from a nearby shipping partner’s location.
Shipping Confirmation:
You will receive a shipping confirmation email with a tracking number as soon as your order is dispatched. If you do not receive this email immediately, please be assured that your items will arrive within the estimated delivery window provided at checkout.
Order Modifications:
If you need to cancel or modify your order, please contact our customer support immediately.
Issues with Delivery:
If your order shows as delivered but you have not received it, please contact the shipping carrier directly to resolve the issue. For persistent problems, contact our customer service at cs@everymarket.com.
Customer Support:
Our team is available 24/7 to assist you with any questions or concerns regarding your order. We are committed to ensuring a smooth shopping experience.
Return & Refund Policy Overview
Please review our return and refund policies below to ensure a smooth transaction process.
Return Policy
-
Duration: You have 30 days from receiving your item to initiate a return.
-
Condition: Items must be unworn, unwashed, with original tags and packaging intact.
-
Shipping Costs:
- If your return is approved due to a defective, damaged, or incorrect item, we will provide a prepaid return shipping label at no cost.
- If the item has no quality issues and matches the product listing and description, please contact our Customer Service team before returning it. Once your return is authorized, you must return the item according to the provided instructions. In this case, the return shipping cost is the customer's responsibility.
- We are not responsible for return shipping costs for items returned without prior authorization. -
Packaging: Ensure returned items are well-packaged to avoid damage during transit.
-
Tracking: Use a trackable and insured shipping method as we are not liable for items lost or damaged on return.
-
Initiating a Return: Contact us at cs@everymarket.com to start your return. We will provide a return shipping label and instructions upon approval. Returns without prior approval will not be accepted.
How to Return
-
Method: Returns must be sent back by mail to the address provided in the return instructions.
Return Label
-
Please contact us to get return labels.
Product Conditions for Return
-
Eligible Products: Returns are only accepted for items in new condition.
Nonreturnable Items
Certain items are not eligible for return:
-
Electronic devices after 30 days (e.g., computers, laptops, Kindles)
-
Gift cards, prepaid game cards
-
Perishable goods, live insects, some jewelry, some health and personal care items
-
Customized or personalized products
-
Items with special shipping restrictions
Refund Policy
-
Window: Eligible products may be returned within 30 days of delivery for a refund.
-
Refund Method: Refunds are processed to the original payment method or as store credit for items purchased with gift cards.
-
Processing Time: Refunds are processed within 3-5 business days after we receive the return; please allow additional time for shipping and bank processing.
Claims
Inspect your order upon arrival and report any defects, damages, or incorrect items immediately to allow us to address the issue. For claims, contact our support team with details of the issue.
Exchange Policy
For the quickest service, return your original item and place a new order for the desired product once your return is accepted.
Return Address
EveryMarket Customer Service 2101 E Terra Ln, O'Fallon, MO 63366
Customer Support
Available 24/7 for any questions or assistance needed:
-
Phone: +1 (800) 660-3783
-
Email: cs@everymarket.com
Oops!
Sorry, it looks like some products are not available in selected quantity.