Thinkdiag2 All System Bidirectional OBD2 Diagnostic Scanner Bluetooth ECU Coding
ThinkDiag2 Has 15+ Poular Maintenance Reset Function
- Oil Light Reset: This allows you to recalculate the engine oil life system after an oil change.
- TPMS Reset: When the car tire pressure fault light is on, after carrying out maintenance, you need to reset the tire pressure through the tire pressure reset function to extinguish the tire pressure fault light.
- Brake pad reset: When the brake pads and brake pad wear sensing line are replaced, the brake pad indicator lights up, after the brake pad sensor line short circuit is repaired, or after the servo motor is replaced, the reset needs to be done.
- SAS Calibration: Calibrate the steering angle sensor and clear the fault memory.
- Battery Reset: It is to use Thinkdiag2 to perform a reset process on the monitoring unit of the car battery, clear the original fault information about the battery being low, make it match again, and let the monitoring unit monitor with the relevant information of the existing battery as the standard.
- ABS Bleeding: When the ABS system contains air, the brake system needs to be exhausted through the ABS exhaust function to restore the ABS system braking sensitivity. The ABS bleed function is required when replacing the ABS computer, ABS pump, brake master pump, brake sub-pump, brake lines, and brake fluid.
- ETS Learning: Initializes the throttle actuator to restore the "learning" values stored on the ECU to their default state.
- D-P-F regeneration: Generally, D-P-F regeneration matching is required when the exhaust back pressure sensor is replaced, the particulate trap is removed or replaced, the fuel additive nozzle is removed or replaced, the catalytic oxidizer is removed or replaced, the DPF regeneration fault light is illuminated and matched after repair, and the D-P-F regeneration control module is repaired and replaced, mainly to remove the trap performance by using combustion oxidation on a regular basis Always maintain the best stability.
- Injector Coding: usually in the replacement of ECU, the injector nozzle, is required to confirm the code of each cylinder nozzle or re-code. So that the cylinder can better identify each cylinder nozzle, and more accurate control or correction of the amount of fuel injection of each cylinder.
- Sunroof initialization: This function can set the sunroof locking off, closing when it rains, memory function of sliding/tilting sunroof, outside temperature threshold, etc.
- E-G-R Adaption: This function can be used for self-learning after E-G-R (Exhaust Gas Recirculation) valve cleaning or replacement
- Suspension Matching: When replacing the body height sensor in the air suspension system, after the control module or when the car is leveled incorrectly, this function needs to be performed to adjust the body height sensor for level calibration.
- Transmission Learning: When the transmission is disassembled or repaired (after the battery is disconnected in some car models), it will lead to shift delay or shock problem, then this function needs to be performed to make the transmission compensate automatically according to the driving conditions in order to achieve a more comfortable and ideal shift quality.
- Headlight Matching
ECU Coding
The ECU coding function is used to reflash the vehicle control module, which allows you to match repaired or replaced components to the ECU. It can activate the hidden functions for VW, for AUDI, for BENZ, and for BMW models.
If you want to confirm whether your model can perform this function, please provide the VIN number or specific vehicle information (year of manufacture/specific model/country of manufacture) and we will confirm for you.
Active Test
The advantage of Thinkdiag2 is that it supports full bi-directional control capability to send commands to the vehicle's systems/components to verify system inputs/outputs without using the vehicle controller. like Shutter Grill Relay Test, Low-Pressure EGR Actuator Test, High-Pressure EGR Actuator Test, Intake Pressure Control Valve Actuator Test, Low-Pressure EGR System Test, Low-Pressure EGR Differential Pressure Sensor Test, 2 stages turbocharger boost test, VTEC low V/T check, Compression Test, IMT (IMRC) test, VTEC Test, VTEC(VCM) Test.
One-Touch AutoVIN Technology
AutoVIN function supports Thinkdiag2 to automatically identify most car models, year of manufacture, and VIN codes. You can enter the corresponding menu and perform a one-click full vehicle scan and a system-wide vehicle health report will be automatically generated later which the report can be shared.
Add CAN-FD protocol
Fits for more GM cars:
· For Chevrolet Tracker/For Suburban/For Tahoe 2023
· For Chevrolet Onix 1.0L(L4F/L4G/LIJ/LIF)/Onix 1.2L(LIF) 2020-2023
· For Cadillac Escalade/Escalade ESV 2021
· For GMC YUKON/YUKON XL 2021
· For Chevrolet Tracker 2020
- Component Matching: For Volkswagen / For SKODA / For Seat / For BMW / For GM / For Ford / For Opel /For Mazda /For Fiat / For Honda / For Nissan / For Hyundai /For KIA /For Subaru etc.
- FCA AutoAuth to unlock SGW in FCA Vehicles: For Chrysler/for Dodge/for Jeep/for Alfa Romeo/for Fiat vehicles, etc.
- Online Coding: For Volkswagen /For Audi /For Benz /For BMW /For Seat /For Porsche etc.
- Online Account Login Service: For Volkswagen /For Audi /For SKODA /For Seat etc.
- Online Calibration: For Volkswagen /For Audi /For SKODA /For Seat etc.
- Online Parameterization:For Volkswagen /For Audi /For SKODA /For Seat etc.
- Guided Functions: For Volkswagen /For Audi /For SKODA /For Seat etc.
- Power Balance: For Chrysler /For GM /For Ford etc.
- Activate the Hidden Functions: For BMW /For Porsche /For Toyota /For Subaru etc.
ThinkDiag 2 Parameter :
Support system: Android & IOS
Bluetooth: Hardware supports 5.0BLE, Bluetooth dual mode
Diagnostic interface: DB15
Working voltage: 12V
Working temperature: -10℃~50℃
Storage environment: ﹣20-60℃
Overall size: 120.5mm*65mm*29mm
Shell material: ABS+PC+TPU rubber sleeve
Lenth of obd Cable : 0.65 meter
How to Operate ThinkDiag 2 When get ?
Step 1 : Download ThinkDiag App from Google play / App store
Step 2 : Register & Login
Step 3 : Active Thinkdiag 2 ( the serial number is in the back of Thinkdiag 2 , the password is in the white sticker in manual book )
Step 4 : Go to download All softwares
Step 5 : Connect Thinkdiag 2 to car , go to read the VIN , it will diagnose !
ThinkDiag 2 Packing List :
1pc * Thinkdiag 2 with obd2 cable
1pc * Manual book ( Multi-language )
1pc * EVA Storage Bag
On Feb 13, 2025 at 19:23:12 PST, seller added the following information:
Shipping Overview:
• Shipping: Standard Domestic Shipping within the United States charges first item USD 5.99 and additional item USD 3.0 each. Standard International Shipping from United Kingdom, Germany, Italian and Japan to the United States charges first item USD 9.99 and additional item USD 4.0 each.
• Import Duty: Everymarket collects applicable duties and taxes on goods imported into the U.S. at checkout, it's calculated based on the goods value multiply by the rate. For United Kingdom and China goods is 10%, Germany, Italian and Japan goods is 15%. We are committed to making your U.S. shopping experience simple and transparent. The method of delivery—either Delivered Duty Paid (DDP) or Delivered Duty Unpaid (DDU)—depends on whether duties and taxes are collected at the time of your purchase.
• Order Processing: Please allow 1-2 business days for order processing and preparation before shipment.
• Domestic Shipping: Orders within the U.S. are shipped via USPS or FedEx, depending on the origin of the product. Average transit times to the United States is 3 - 7 Business days and average transit times to International is 7 - 14 Business days
• International Shipping: Currently, we only ship within the USA.
• Tracking Information: Every order is trackable. You will receive a tracking number once your order has been shipped. Products may be shipped from various global fulfillment centers.
Shipping Delays:
Please note that shipping times may vary due to factors beyond our control, such as weather conditions, natural disasters, or peak holiday periods. While we strive to ensure timely delivery, the exact arrival time cannot be guaranteed and is managed by the shipping carrier.
Shipping Options:
-
Standard Delivery: Most orders are shipped within 3-7 business days. Larger items may utilize LTL shipping for safe handling.
-
Handling Time: We handle shipments on business days (Monday - Friday), with a preparation time of 1-2 days.
-
Additional Charges: Some items require additional shipping charges due to their size, weight, or special handling. These charges are specified on the product pages and are not eligible for shipping discounts.
-
Exclusions: Gift cards, packaging, taxes, and prior purchases do not count toward the minimum purchase requirement for free shipping. This offer is valid only for shipments to U.S. addresses, including Puerto Rico.
Delivery Details:
-
Estimates: Standard shipping within the US typically takes 3-7 business days. These are estimates and not guarantees.
-
Shipping Restrictions: We ship to all 50 states, Washington, DC, U.S. territories, and APO/FPO/DPO addresses. Shipping options vary based on the delivery address.
-
Remote Areas: Shipments to remote areas may incur additional charges or require pickup from a nearby shipping partner’s location.
Shipping Confirmation:
You will receive a shipping confirmation email with a tracking number as soon as your order is dispatched. If you do not receive this email immediately, please be assured that your items will arrive within the estimated delivery window provided at checkout.
Order Modifications:
If you need to cancel or modify your order, please contact our customer support immediately.
Issues with Delivery:
If your order shows as delivered but you have not received it, please contact the shipping carrier directly to resolve the issue. For persistent problems, contact our customer service at cs@everymarket.com.
Customer Support:
Our team is available 24/7 to assist you with any questions or concerns regarding your order. We are committed to ensuring a smooth shopping experience.
Return & Refund Policy Overview
Please review our return and refund policies below to ensure a smooth transaction process.
Return Policy
-
Duration: You have 30 days from receiving your item to initiate a return.
-
Condition: Items must be unworn, unwashed, with original tags and packaging intact.
-
Shipping Costs: Please contact us to initiate your return, we'll offer return label for free. Otherwise we are not responsible for the return shipping costs of the items.
-
Packaging: Ensure returned items are well-packaged to avoid damage during transit.
-
Tracking: Use a trackable and insured shipping method as we are not liable for items lost or damaged on return.
-
Initiating a Return: Contact us at cs@everymarket.com to start your return. We will provide a return shipping label and instructions upon approval. Returns without prior approval will not be accepted.
How to Return
-
Method: Returns must be sent back by mail to the address provided in the return instructions.
Return Label
-
Please contact us to get return labels.
Product Conditions for Return
-
Eligible Products: Returns are only accepted for items in new condition.
Nonreturnable Items
Certain items are not eligible for return:
-
Electronic devices after 30 days (e.g., computers, laptops, Kindles)
-
Gift cards, prepaid game cards
-
Perishable goods, live insects, some jewelry, some health and personal care items
-
Customized or personalized products
-
Items with special shipping restrictions
Refund Policy
-
Window: Eligible products may be returned within 30 days of delivery for a refund.
-
Refund Method: Refunds are processed to the original payment method or as store credit for items purchased with gift cards.
-
Processing Time: Refunds are processed within 3-5 business days after we receive the return; please allow additional time for shipping and bank processing.
Claims
Inspect your order upon arrival and report any defects, damages, or incorrect items immediately to allow us to address the issue. For claims, contact our support team with details of the issue.
Exchange Policy
For the quickest service, return your original item and place a new order for the desired product once your return is accepted.
Return Address
EveryMarket Customer Service 2101 E Terra Ln, O'Fallon, MO 63366
Customer Support
Available 24/7 for any questions or assistance needed:
-
Phone: +1 (800) 660-3783
-
Email: cs@everymarket.com
ThinkDiag2 Has 15+ Poular Maintenance Reset Function
- Oil Light Reset: This allows you to recalculate the engine oil life system after an oil change.
- TPMS Reset: When the car tire pressure fault light is on, after carrying out maintenance, you need to reset the tire pressure through the tire pressure reset function to extinguish the tire pressure fault light.
- Brake pad reset: When the brake pads and brake pad wear sensing line are replaced, the brake pad indicator lights up, after the brake pad sensor line short circuit is repaired, or after the servo motor is replaced, the reset needs to be done.
- SAS Calibration: Calibrate the steering angle sensor and clear the fault memory.
- Battery Reset: It is to use Thinkdiag2 to perform a reset process on the monitoring unit of the car battery, clear the original fault information about the battery being low, make it match again, and let the monitoring unit monitor with the relevant information of the existing battery as the standard.
- ABS Bleeding: When the ABS system contains air, the brake system needs to be exhausted through the ABS exhaust function to restore the ABS system braking sensitivity. The ABS bleed function is required when replacing the ABS computer, ABS pump, brake master pump, brake sub-pump, brake lines, and brake fluid.
- ETS Learning: Initializes the throttle actuator to restore the "learning" values stored on the ECU to their default state.
- D-P-F regeneration: Generally, D-P-F regeneration matching is required when the exhaust back pressure sensor is replaced, the particulate trap is removed or replaced, the fuel additive nozzle is removed or replaced, the catalytic oxidizer is removed or replaced, the DPF regeneration fault light is illuminated and matched after repair, and the D-P-F regeneration control module is repaired and replaced, mainly to remove the trap performance by using combustion oxidation on a regular basis Always maintain the best stability.
- Injector Coding: usually in the replacement of ECU, the injector nozzle, is required to confirm the code of each cylinder nozzle or re-code. So that the cylinder can better identify each cylinder nozzle, and more accurate control or correction of the amount of fuel injection of each cylinder.
- Sunroof initialization: This function can set the sunroof locking off, closing when it rains, memory function of sliding/tilting sunroof, outside temperature threshold, etc.
- E-G-R Adaption: This function can be used for self-learning after E-G-R (Exhaust Gas Recirculation) valve cleaning or replacement
- Suspension Matching: When replacing the body height sensor in the air suspension system, after the control module or when the car is leveled incorrectly, this function needs to be performed to adjust the body height sensor for level calibration.
- Transmission Learning: When the transmission is disassembled or repaired (after the battery is disconnected in some car models), it will lead to shift delay or shock problem, then this function needs to be performed to make the transmission compensate automatically according to the driving conditions in order to achieve a more comfortable and ideal shift quality.
- Headlight Matching
ECU Coding
The ECU coding function is used to reflash the vehicle control module, which allows you to match repaired or replaced components to the ECU. It can activate the hidden functions for VW, for AUDI, for BENZ, and for BMW models.
If you want to confirm whether your model can perform this function, please provide the VIN number or specific vehicle information (year of manufacture/specific model/country of manufacture) and we will confirm for you.
Active Test
The advantage of Thinkdiag2 is that it supports full bi-directional control capability to send commands to the vehicle's systems/components to verify system inputs/outputs without using the vehicle controller. like Shutter Grill Relay Test, Low-Pressure EGR Actuator Test, High-Pressure EGR Actuator Test, Intake Pressure Control Valve Actuator Test, Low-Pressure EGR System Test, Low-Pressure EGR Differential Pressure Sensor Test, 2 stages turbocharger boost test, VTEC low V/T check, Compression Test, IMT (IMRC) test, VTEC Test, VTEC(VCM) Test.
One-Touch AutoVIN Technology
AutoVIN function supports Thinkdiag2 to automatically identify most car models, year of manufacture, and VIN codes. You can enter the corresponding menu and perform a one-click full vehicle scan and a system-wide vehicle health report will be automatically generated later which the report can be shared.
Add CAN-FD protocol
Fits for more GM cars:
· For Chevrolet Tracker/For Suburban/For Tahoe 2023
· For Chevrolet Onix 1.0L(L4F/L4G/LIJ/LIF)/Onix 1.2L(LIF) 2020-2023
· For Cadillac Escalade/Escalade ESV 2021
· For GMC YUKON/YUKON XL 2021
· For Chevrolet Tracker 2020
- Component Matching: For Volkswagen / For SKODA / For Seat / For BMW / For GM / For Ford / For Opel /For Mazda /For Fiat / For Honda / For Nissan / For Hyundai /For KIA /For Subaru etc.
- FCA AutoAuth to unlock SGW in FCA Vehicles: For Chrysler/for Dodge/for Jeep/for Alfa Romeo/for Fiat vehicles, etc.
- Online Coding: For Volkswagen /For Audi /For Benz /For BMW /For Seat /For Porsche etc.
- Online Account Login Service: For Volkswagen /For Audi /For SKODA /For Seat etc.
- Online Calibration: For Volkswagen /For Audi /For SKODA /For Seat etc.
- Online Parameterization:For Volkswagen /For Audi /For SKODA /For Seat etc.
- Guided Functions: For Volkswagen /For Audi /For SKODA /For Seat etc.
- Power Balance: For Chrysler /For GM /For Ford etc.
- Activate the Hidden Functions: For BMW /For Porsche /For Toyota /For Subaru etc.
ThinkDiag 2 Parameter :
Support system: Android & IOS
Bluetooth: Hardware supports 5.0BLE, Bluetooth dual mode
Diagnostic interface: DB15
Working voltage: 12V
Working temperature: -10℃~50℃
Storage environment: ﹣20-60℃
Overall size: 120.5mm*65mm*29mm
Shell material: ABS+PC+TPU rubber sleeve
Lenth of obd Cable : 0.65 meter
How to Operate ThinkDiag 2 When get ?
Step 1 : Download ThinkDiag App from Google play / App store
Step 2 : Register & Login
Step 3 : Active Thinkdiag 2 ( the serial number is in the back of Thinkdiag 2 , the password is in the white sticker in manual book )
Step 4 : Go to download All softwares
Step 5 : Connect Thinkdiag 2 to car , go to read the VIN , it will diagnose !
ThinkDiag 2 Packing List :
1pc * Thinkdiag 2 with obd2 cable
1pc * Manual book ( Multi-language )
1pc * EVA Storage Bag
On Feb 13, 2025 at 19:23:12 PST, seller added the following information:
Shipping Overview:
• Shipping: Standard Domestic Shipping within the United States charges first item USD 5.99 and additional item USD 3.0 each. Standard International Shipping from United Kingdom, Germany, Italian and Japan to the United States charges first item USD 9.99 and additional item USD 4.0 each.
• Import Duty: Everymarket collects applicable duties and taxes on goods imported into the U.S. at checkout, it's calculated based on the goods value multiply by the rate. For United Kingdom and China goods is 10%, Germany, Italian and Japan goods is 15%. We are committed to making your U.S. shopping experience simple and transparent. The method of delivery—either Delivered Duty Paid (DDP) or Delivered Duty Unpaid (DDU)—depends on whether duties and taxes are collected at the time of your purchase.
• Order Processing: Please allow 1-2 business days for order processing and preparation before shipment.
• Domestic Shipping: Orders within the U.S. are shipped via USPS or FedEx, depending on the origin of the product. Average transit times to the United States is 3 - 7 Business days and average transit times to International is 7 - 14 Business days
• International Shipping: Currently, we only ship within the USA.
• Tracking Information: Every order is trackable. You will receive a tracking number once your order has been shipped. Products may be shipped from various global fulfillment centers.
Shipping Delays:
Please note that shipping times may vary due to factors beyond our control, such as weather conditions, natural disasters, or peak holiday periods. While we strive to ensure timely delivery, the exact arrival time cannot be guaranteed and is managed by the shipping carrier.
Shipping Options:
-
Standard Delivery: Most orders are shipped within 3-7 business days. Larger items may utilize LTL shipping for safe handling.
-
Handling Time: We handle shipments on business days (Monday - Friday), with a preparation time of 1-2 days.
-
Additional Charges: Some items require additional shipping charges due to their size, weight, or special handling. These charges are specified on the product pages and are not eligible for shipping discounts.
-
Exclusions: Gift cards, packaging, taxes, and prior purchases do not count toward the minimum purchase requirement for free shipping. This offer is valid only for shipments to U.S. addresses, including Puerto Rico.
Delivery Details:
-
Estimates: Standard shipping within the US typically takes 3-7 business days. These are estimates and not guarantees.
-
Shipping Restrictions: We ship to all 50 states, Washington, DC, U.S. territories, and APO/FPO/DPO addresses. Shipping options vary based on the delivery address.
-
Remote Areas: Shipments to remote areas may incur additional charges or require pickup from a nearby shipping partner’s location.
Shipping Confirmation:
You will receive a shipping confirmation email with a tracking number as soon as your order is dispatched. If you do not receive this email immediately, please be assured that your items will arrive within the estimated delivery window provided at checkout.
Order Modifications:
If you need to cancel or modify your order, please contact our customer support immediately.
Issues with Delivery:
If your order shows as delivered but you have not received it, please contact the shipping carrier directly to resolve the issue. For persistent problems, contact our customer service at cs@everymarket.com.
Customer Support:
Our team is available 24/7 to assist you with any questions or concerns regarding your order. We are committed to ensuring a smooth shopping experience.
Return & Refund Policy Overview
Please review our return and refund policies below to ensure a smooth transaction process.
Return Policy
-
Duration: You have 30 days from receiving your item to initiate a return.
-
Condition: Items must be unworn, unwashed, with original tags and packaging intact.
-
Shipping Costs: Please contact us to initiate your return, we'll offer return label for free. Otherwise we are not responsible for the return shipping costs of the items.
-
Packaging: Ensure returned items are well-packaged to avoid damage during transit.
-
Tracking: Use a trackable and insured shipping method as we are not liable for items lost or damaged on return.
-
Initiating a Return: Contact us at cs@everymarket.com to start your return. We will provide a return shipping label and instructions upon approval. Returns without prior approval will not be accepted.
How to Return
-
Method: Returns must be sent back by mail to the address provided in the return instructions.
Return Label
-
Please contact us to get return labels.
Product Conditions for Return
-
Eligible Products: Returns are only accepted for items in new condition.
Nonreturnable Items
Certain items are not eligible for return:
-
Electronic devices after 30 days (e.g., computers, laptops, Kindles)
-
Gift cards, prepaid game cards
-
Perishable goods, live insects, some jewelry, some health and personal care items
-
Customized or personalized products
-
Items with special shipping restrictions
Refund Policy
-
Window: Eligible products may be returned within 30 days of delivery for a refund.
-
Refund Method: Refunds are processed to the original payment method or as store credit for items purchased with gift cards.
-
Processing Time: Refunds are processed within 3-5 business days after we receive the return; please allow additional time for shipping and bank processing.
Claims
Inspect your order upon arrival and report any defects, damages, or incorrect items immediately to allow us to address the issue. For claims, contact our support team with details of the issue.
Exchange Policy
For the quickest service, return your original item and place a new order for the desired product once your return is accepted.
Return Address
EveryMarket Customer Service 2101 E Terra Ln, O'Fallon, MO 63366
Customer Support
Available 24/7 for any questions or assistance needed:
-
Phone: +1 (800) 660-3783
-
Email: cs@everymarket.com
Oops!
Sorry, it looks like some products are not available in selected quantity.