XTOOL IP508 Check Engine OBD2 Scanner Transmission ABS SRS Code Reader Scan Tool

 XTOOL InPlus IP508 2024 New Release OBD2 Scanner, Just What You Need!
>>9 Maintenance Services>>5 Major System Diagnostics>>Full OBD2 Diagnostics(10 Modes) 

What Makes IP508 Scan Tool Best Bang Of the Buck Among All kinds of OBD2 Scanners?

🌟9 Maintenance Services

🌟5 Systems Diagnosis

🌟Full OBD2 Diagnostic(10 Modes)

🌟8-In-1 Live Data Graphing & Date Record & Playback

🌟Two Years Warranty & Lifetime Free Update(One-Touch WIFI)

🌟Auto VIN & Auto Scan

🌟15 Kinds of Languages Support & Remote Assistance

🌟CANFD Protocol

🌟Advanced Hardware ---> Android 10.0, 2GB+32GB, 3000mAh Battery, 5" LCD Touch Screen

--9 Reset Functions:

• Oil Reset: Reset the Engine Oil Life System, which calculates the optimum oil life change interval based on the vehicle's driving conditions and climate.
  
• BMS Reset: The Battery Management System (BMS) allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
  
• ABS Bleeding: After the gear learning is successful, the MIL will be closed. This function can complete the self-learning of the gearbox and improve the quality of shifting.
  
• Throttle: Initialize the throttle actuators to the default state for regulating throttle (or idle engine) operations accurately.
  
• SAS: SAS reset supports recalibration of the steering angle sensor. After the calibration is successfully completed, the SAS fault memory will be automatically cleared.
  
• EPB: Reset the electronic parking brake system and brake pads, which also supports the brake pad replacement (retraction, release of the brake pump), G-sensor and body angle calibration.
  
• TPMS Reset: Tire Pressure Monitor System (TPMS) Reset allows you to quickly look up the tire sensor IDs from the vehicle E*CU, as well as to perform TPMS replacement and reset procedures after tire sensors are replaced.
  
• Injector Coding: Write the identification code of the injector into the E*CU so that the E*CU can recognize and work normally.
  
• D*PF: D*PF regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to stabilize the filter performance.
  

--5 Major System Diagnostic

Engine System >> Read and clear check engine light code on most 1996 & update models. 

ABS System >> Read & clear ABS DTCs, turn off the ABS WILs, and check the data graphing of speed of each wheel, ESP sensors data, Brake assist data, and 
CAN signals data, etc.

EPB System >> Activates the holding mechanism with a button and the brake pads are electrically applied to the rear wheels.to ensure safe vehicle control and operation.

Airbag System Diagnostic >> Supports supplementary restraint system (SRS) diagnosis for most domestic and imported vehicles. By reading the codes and google DTC definition helps to solve the issue. It helps remind you even if maintenance, solve security risks.

Transmission System >> It makes great sense in the safety driving when your car is slipping or difficult to shift, this diagnostic tool can figure the problems out via reading codes in the Transmission system, or check the health status via live data viewing.

--Full OBD2 Diagnostics(10 Modes)

XTOOL IP508 scanner is an enhanced OBD II and EOBD scanner that covers all obd2 protocols and all OBD diagnostic to read/clear codes, view live data, freeze frame data, vehicle info, check I/M readiness status, O2 monitor test, on-board monitor test (Mode 06), O2 Sensor Test, component Test.

--Built in DTC Library: 

This OBD2 scanner also gives you the details definitions of fault co*des in the Diagnostic Trouble C0de (DTC) lookup library. You can simply select the code to read its definition and see potential ways to solve your car problems, save your time for searching online.

--Live Data Graphing & Date Record & Playback:

View Various Sensors’ PIDs, like O2 sensor data, Misfire Data, Long/Short Term Fuel Trim, Mass Air Flow, Intake Air Temp, Fuel Rail Pressure, Engine RPM, Idle Speed, Coolant Temp, Transmission Oil Temperature, ABS Wheel Speed, and etc.

--Check Freeze Frame: 

Record various related parameters the moment a DTC is recorded in the E#**CU.

--Retrieve E#**CU Information: 

Check the module info, software version and etc.

--One-Touch WiFi Update Makes Everything Easy:

Unlike other scanners in the market, you don't need to update the software via the manufacturer's website or PC. With just one simple click, you can get the auto-update via wifi to get the latest software.

--AutoScan & AutoVIN: 

AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.

--Multi-Language supports: 

English, French, Spanish, Russian, Japanese, German, Italian, Portuguese, Korean. Please offer your tool S/N if you need to change the menu language.
Note: AutoVIN can't work on All Vehicles. Please try manually Input if AutoVIN failed or come to us for check with your VINs.

Dealership Level Diagnostics to Turn off Warning Light on Engine/SRS/ABS/Transmission Systems

>>What Does the Automatic Transmission/Gearbox Warning Light Mean?>>
If the Transmission computer detects any abnormal readings from the sensors, a code will be stored and the automatic transmission indicator light will turn on to alert the driver of possible issues.
Most common issues that causes this indicator light to illuminate are related to: High Transmission fluid temperature, Low Transmission Fluid Level, Internal Transmission Failure, etc.
With InPlus IP508 you can easily scan the car’s computer for any codes, and view live stream data of various sensors like fluid temperature, clutch actuation, pressure, etc., to help determine the cause of the issue.
>>Reasons Why Your Supplemental Restraint System(Airbag) Light Is On>>
Supplemental Restraint System (SRS), often recognized as the airbag light. Several factors might trigger your SRS light to illuminate. The most straight forward approach to check whether your SRS airbag system is malfunctioning is to utilize IP508 diagnostic scanner to read and clear fault co*des in the SRS (airbag) and turn off the warning light to make sure the system is working properly and safely.
The following functions are available on SRS (airbag):
✔ Read and clear fault co*des ✔ Turn off the SRS warning light ✔ Display live data graphing on various sensors for better analyze ✔ etc.
>>What if the Anti-lock Braking System (ABS) Stays On?>>
Four most common may cause of the ABS light coming on include a malfunctioning ABS module, low levels in the fluid reservoir, broken wheel speed sensors, or the system is turned off.
On average, an ABS diagnostic test on repair shop to assess ABS is 80~100 bucks, in addition to any repairs and labor costs.
By XTOOL IP508 code reader, you can read and clear the Diagnostic Trouble C0des (DTC) from the ABS and turn off the warning light. By retrieving the ABS live data stream to view the various brake components to accurately locate diagnose problems.

Full OBD2 Functionality To Turn Off Check Engine Light

The average repair cost for most check engine light-related breakdowns lands at about 3,000 dollors.
Like XTOOL IP508S, IP508 scanner will also help giving you the confidence to better understand your car and learn how to perform common diagnosis and repair by yourself. Also avoid car repair scams and sky-high repair cost even when you need to sent your car to the repair shop.
IP508 OBD2 Code Reader Scanner for All OBD II Protocols Cars Since 1996
- Read/Erase Fault Co*des:
Read and clear check engine light codes including generic, manufacturer-specific, and pending codes to clears the codes and turns off the warning light.
- Live Data Stream: 
Displays live data stream in digits/text, allows you to compare live readings to find out suspicious parameters.
- Freeze Frame: 
Shows vehicle parameters recorded by ECU when an emission-related fault occurs.
- O2 Sensor Test: 
Allows you to retrieve and view the O2 sensor monitor test result for the last test performed from the vehicle's on-board computer.
- On-board Monitor Test(Mode 06): 
Retrieves and displays test results for emission-related components and systems. Track on how emission control components and sensors are functioning(e.g. Misfire Monitoring, Exhaust Gas Sensor Monitor, Fuel System Monitor).
- I/M Readiness Check:
 InPlus IP508 car diagnostic scanner tool comes with I/M Readiness function to check the operations of the vehicle-specific number of monitors like misfire monitor, fuel system monitor, comprehensive components monitor, Oxygen sensor monitor and etc, helping your vehicle ready to pass the annual smog check.
- Component Test(Mode 08): 
Use IP508 scan tool to plug into the vehicle's computer and determines that the emission system and components are working properly. The test downloads stored information from the vehicle's computer to identify emission systems or components that are not working properly.
- View Vehicle Information: 
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
- DTC Lookup Library: IP508 code reader can lookup the complaint fault co~de's definition directly, including the fault description, the cause of the fault, maintenance suggestions and background knowledge, saves your searching time and help you better understand the fault co*de definition.
NOTE: To check misfire counters, monitor readiness status, o2 sensor status, please go to Diagnosis- OBDII- On_Board Monitor Tests/I/M Readiness Status/O2 Monitor Test.

Powerful Live Data Streams Help you More Confident To Address The Faults

✔ Customize Specific PID on 4 Main Systems: XTOOL InPlus IP508 OBD2 Scan Tool display live data stream in text or graphs like cylinder misfires data, transmission fluid/Oil temperature, fuel trim, ATF temperature, cylinder balance rates, engine rpm, O2 sensors, mass air flow sensor data, fuel pressure, actual fuel temperature vs desired fuel temperature and etc;
✔ 8-IN-1 Live Data Graphing: Allow you to select specific PIDs, and merge graphs for up to 8 data PIDs combined at one time in one graph. A line graph will allow you to see what happened at what time and in relation to what else you're interested in, such as fuel pressure, battery voltage, cylinder misfire data, long/short fuel trim, engine rpm, etc.
✔ Graph up to 8 sensors individually in one view.
✔ Live Data Record/Playback: Record and playback the live data stream later to better troubleshoot/compare and analysis to address the faults.
✔ Export Live Data as CSV File: Export Live Data records as CSV files and store them for analyzing the vehicle performance over time.
✔ More

Extra Features On InPlus IP508 OBD Scanner You Should Know About

✔ One Click WiFi Update Makes Everything Easy: Unlike other scanners in the market, you don't need to update the software via the manufacturer's website or PC. With just one simple click, you can get the auto-update via wifi to get the latest software.
✔ AutoScan & AutoVIN: AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.
✔ Diagnostic Report Printing & Sharing: IP508 auto diagnostic scan tool enables diagnostic tech or mechanics to generate diagnostic reports before and after car diagnostics and maintenance services by printing it out or sending it to customers via PDF.
✔ Wide Vehicle Coverages over 10,000+ cars: Cover 10,000+ Vehicles, Up to 2022, 2021 including cars, SUVs, minivans, 12v light-duty trucks
✔ DTC Lookup Library: IP508 code reader can lookup the complaint fault co~de's definition directly, including the fault description, the cause of the fault, maintenance suggestions and background knowledge, saves your searching time and help you better understand the fault co*de definition.
✔ Cover 14+ menu languages: XTOOL IP508 Supports 14+ menu language. Please send the Serial Number(S/N) to change English to Spanish, Portuguese, French, Japanese, German, Polish, Russian, Italian, Korean, Dutch, Swedish, etc.